Troutnut.com Fly Fishing for Trout Home
User Password
or register.
Scientific name search:

> > Leaders



GreglindseyJanuary 11th, 2014, 3:16 pm
Corry. PA

Posts: 17
When I usually nymph I use a fifteen foot leader made out of Maximum then tipped off with tippet. When I do see a fish rise I find that it is tough to fish a dry fly with that leader. I don't know if it would be hard long line nymphing a shorter leader or not. If anyone has any tips please share.

Thanks
CrepuscularJanuary 12th, 2014, 12:04 pm
Boiling Springs, PA

Posts: 923
Hi Greg. 15' seems pretty long of a leader for nymphing to me, unless you are using a bobber. A 12-15 foot dry fly leader is about standard. So what is it that you are finding difficult about fishing the dry fly with that leader? Are you getting drag? If that's the case it all depends on the exact current situation and presentation of the fly. Sometimes it s as easy as just changing your position in relation to your target. If you are set on always using a long line nymphing technique a la George Daniels (but even he says he prefers to tight line nymph) it may just be your presentation. If you are having trouble turning the leader over, it may be your leader construction. So I may be able to give a better answer if you elaborate on what you mean when you say you find it tough to fish a dry fly with that leader.

Eric
GreglindseyJanuary 12th, 2014, 1:14 pm
Corry. PA

Posts: 17
Well it has a lot of drag and when I cast the leader seems heavy. I'm fishing the leader with a 10ft 3wt. I don't know if it is the leader material or what. I just want a leader that I can effectively fish nymphs and dries on.
StokesJanuary 12th, 2014, 1:26 pm
Columbia county,NY

Posts: 76
I'm new at stream fishing,so this is just what I would try,dont know that it is correct or not.I would find some medium between what you use for dries and what you are now using
WbranchJanuary 12th, 2014, 3:40 pm
York & Starlight PA

Posts: 2733
Firstly I'm having a bit of a problem trying to understand how you can effectively nymph very much of anything larger than a #14 nymph and maybe one "B" size shot, or weighted fly, on a 10' #3 rod/line combo. I've thrown my share of nymphs over the years with very good success and I'd never use any rod less than a 8' 6" #5 for day in and day out nymphing using flies from a #16 to a #8. Now of course if all I was fishing was a clear spring creek where sleath and presentation were key then I would use the 10' #3. But I'd figure my fly sizes would be #16 - #22.

For the nymphing I most often do I use a 9' - 10' leader tipped out to 3x or 4x. With such a rig I can fish with, or without, an indicator. You can easily throw a couple BB size shot, and use flies from a #16 to a #8. You can still high stick with this method and to be frank it is much easier to keep your line off of the water with a 9' - 10' leader than one that is 15' long.
Catskill fly fisher for fifty-five years.
MartinlfJanuary 12th, 2014, 6:36 pm
Moderator
Palmyra PA

Posts: 3233
With long rods designed for European nymphing George Daniels recommends a 9'0X knotless leader with a sighter then 4-5 foot tippet as a good compromise leader for both nymphing and dry fly fishing. That gives you about 13' of leader on the short side for nymphs or dries, and you can always cut the tippet back. But so much depends on your casting style, position in relation to the fish, dry fly strategy, nymphing approach, etc., as Eric notes. And if you aren't throwing big flies a 9' 3X or 2X might possibly work very well. Daniels typically fishes weighted nymphs, avoiding split shot, though he notes he will use it on occasion. You might take a look at his book, Dynamic Nymphing, for some ideas; he has other leaders in it, and the book gives an idea about how much variation exists in terms of what others do.
"He spread them a yard and a half. 'And every one that got away is this big.'"

--Fred Chappell
PaulRobertsJanuary 12th, 2014, 7:42 pm
Colorado

Posts: 1776
Sounds like maybe you are trying to fish "all-round" with a specialized long-line nymphing rig. Especially long leaders have their place, but they can be unwieldy for a lot of applications.

A standard leader configuration can be used for a lot of dry and wet uses. It's the roughly 60/20/20 configuration: 60% butt, 20% transition, 20% tippet. That should get you started on the right path and will cover a lot of water.

Make sure your butt is appropriate in mass for the fly line too. For a 3 wt I start at .015 to .016 diameter. That offers plenty of mass to start turn a standard leader and fly over, without overwhelming a 3wt.

There are ways of setting up a line to change out entire leaders, usually via loops. Or, if you have enough of them, you can dedicate reels (or spools) for specific uses.
CrepuscularJanuary 12th, 2014, 7:44 pm
Boiling Springs, PA

Posts: 923
Greg can you elaborate on your Maxima leader construction?

EDIT

Well I guess I missed Paul's post when I wrote mine. So there you have it. He pretty well sums it up with some excellent advice on leader construction.
GreglindseyJanuary 13th, 2014, 7:50 pm
Corry. PA

Posts: 17
Ok thanks for the information guys I guess I will need too do some leader reconstruction. I will look in the book and see what I can find.
WbranchJanuary 14th, 2014, 9:11 pm
York & Starlight PA

Posts: 2733
So what's wrong with a nice store bought 9' - 12' tapered leader? Why have a relative newcomer go out and spend $60 - $100 for a kit to make hand knotted leaders? I remember back in my 20's I bought an Orvis leader tying kit. I used it for a couple of seasons and got bored with it and have not tied a complete trout leader in at least twenty-five years. Each to his own but to me there is nothing like a modern nylon 9' - 12' knotless leader with a nice heavy butt and just one blood knot (or micro ring) to attach a piece of 24" - 36" long fluorocarbon tippet.
Catskill fly fisher for fifty-five years.
StokesJanuary 14th, 2014, 10:09 pm
Columbia county,NY

Posts: 76
I like the knotless braided leaders,just tie a loop in a couple feet of tippet material.I have the leaders in 5 1/2 ft,7 1/2,9 1/2 and 12 ft lengths.Someone gave me a 16 footer that I havent found a use for,might use it for a "grass leader".
PaulRobertsJanuary 15th, 2014, 6:41 pm
Colorado

Posts: 1776
I admit I have little experience with knotless leaders. I've used them here and there, but mostly only the butt taper from them, modifying from there. At the first FF camp I ran I bought tapered leaders to save time, and ... my! The butts were too heavy and the tapers too short! I had to stop the class and do a leader construction lesson. Obviously I had the wrong leaders to begin with. I know there are plenty of good leaders out there and that most FFer's use them.

I guess I started tying leaders long ago and never left it. It's plenty easy. No "special formula" materials are needed except that abrasion resistant lines are most durable. I used Trilene XT (and now Trilene Sensation) for years. A 300yd spool costs 5-7dollars and lasts a looong time, esp the larger diameters. I even use it for tippet material down to .006. Never could understand paying almost the same amount for 30meters -especially for transition and tippet diameters. which I use the most of. For fine tippets, .007 and under, I buy tippet spools though.

Just my 2cents and offered just to chat fishing. No strong opinions on the subject.
WbranchJanuary 16th, 2014, 5:51 am
York & Starlight PA

Posts: 2733
One of the reasons why I primarily use knotless leaders is that one of the rivers that I fish most often has large amounts of aquatic vegetation especially from June forward. The vegetation is constantly floating down river in the water column and the multiple knots on a knotted leader act like little magnets for the bits of grass.

I am on the river to cast and catch trout and not to be constantly wasting time picking bits of green gunk off of my leader. Additionally since I have rarely used knotted leaders and learned to cast with knotless leaders I have worked through any limitations they have to compared to the potential efficiency I would gain with knotted leaders.
Catskill fly fisher for fifty-five years.
CrepuscularJanuary 16th, 2014, 8:27 am
Boiling Springs, PA

Posts: 923
Like Matt I like the tapered leaders for the absence of weed collecting knots. But I also go through a lot of leaders and it is just easier with the tapered leaders with tippet sections added on. That way I have one or maybe two knots and that's it. For years I tied my own leaders and just out of resistance to change put off buying the manufactured tapered leaders but now, with only a couple of exceptions the manufactured tapered leaders are the way to go for me. my $0.02
Feathers5January 16th, 2014, 9:49 am
Posts: 287I tie my own nymph leaders, but carry some knotless leaders in case I start picking up a lot of weeds.
BoulderWorkJanuary 16th, 2014, 12:41 pm
Posts: 29There are many schools of thought on leader design, manufacture material sourcing and application of the design to particular types of fisheries and resident population.

Similar to Wbranch, I have purchased multiple leader tie kits from ORVIS and Maxima. In progression, I utilized ORVIS design recipes, reviewed and incorporated Humphrey/Harvey design into my working set of leaders, and now working through analyzing George Daniel's designs for application as well.

What is right about purchasing a leader tie kit is that sets a foundation for beginners and more advanced fly fisherman to gain a deeper understanding and appreciation of functioning versus non-functioning designs. How else can a budding novice learn?

Otherwise, I am a big fan of furled leaders for many reasons including the minimal use of knots, strength, design flexibility, and durability.
LastchanceJanuary 16th, 2014, 6:37 pm
Portage, PA

Posts: 437
To take it to the base level you actually don't even need a tapered leader to high stick nymph. I've already used a 6 ft. piece of the same size tippet tied to the butt end of my leader. A lot of nymphing, especially in pocket water, doesn't require casting. Sacrilegious I know. I know, I'm crazy, I don't know what I'm talking about, I don't read enough, etc. etc. Try to eliminate a belly in your leader, focus, and feel what's going on with the fly. Now, if you're on a large river and need to cast, or even a small stream and need to cast, this won't cut it for you. You need a leader that will turn over.

Quick Reply

You have to be logged in to post on the forum. It's this easy:
Username:          Email:

Password:    Confirm Password:

I am at least 13 years old and agree to the rules.

Related Discussions

TitleRepliesLast Reply
Re: Tippet affecting Energy Transfer?
In Gear Talk by FisherOfMen
6Apr 28, 2015
by Cptenn94
Re: New flyline set up
In Gear Talk by David82nd
16Jun 12, 2017
by Wbranch
Re: LEADERS!!!
In Gear Talk by Ericd
14May 25, 2010
by Ericd
Re: Matching line, leader, & fly
In General Discussion by Ducfat
5Oct 25, 2007
by GONZO
Re: Learning lines?
In Beginner Help by GaryO
1Jul 21, 2015
by Wbranch
Fly Fishing - Basics, Knots and Techniques
In Fly Tying by Zakisimo
0
Re: Questions about leaders and tippets
In Beginner Help by Cptenn94
8Apr 30, 2015
by Wbranch
Re: Steelhead Report/Leader formula
In General Discussion by Goose
4Oct 7, 2011
by Sayfu
Re: Leaders- super long, slack, George Harvey style etc.
In Gear Talk by Roguerat
19Dec 20, 2018
by Wbranch
Re: Furled leaders
In Gear Talk by Adirman
11Jul 13, 2018
by Adirman